2.HOW TO MAKE COPIES
Bypass Copying 43
2 HOW TO MAKE COPIES
5
Press [SIZE SETTING] on the touch panel.
2
Place the envelope on a flat clean surface and press it
with your hands in the direction of the arrow to expel
any air.
Press it well to prevent the flap from rolling upward.
Correct any bent corners on the envelope.
3
Move the paper holding lever toward the outside.
Place the envelope with its face down on the bypass
tray.
Place the envelope with its flap side at the front.
Do not make a copy on the back of the envelope. This may cause a
paper jam or soil the copy paper or the inside of the equipment.
4
Align the side guides to the length of the envelope
while holding the tab. Move the paper holding lever
toward the equipment.
When the envelope is placed, the menu for bypass copying appears.
2
1
1
2
To Next Page
Loading...
Need help?
General
