Toshiba E-STUDIO520 - Page 317

14
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 FUSER UNIT
14 - 27
(8) Remove 2 screws and disconnect 1 connec-
tor.
(9) Remove 1 C-ring (rear).
Fig.14-36
(10) Remove 1 E-ring and take off the gear and
one-way clutch.
(11) Remove 2 screws and take off the bearing
(rear).
Fig.14-37
(12) Remove 1 C-ring (front).
Fig.14-38
Connector
Screw
Screw
C-ring
(
rear
)
Bearing
(
rear
)
Gear, One-way clutch
E-ring
Screw
Screw
C-ring
(
front
)