Toshiba GX9 - Page 186

174 GX9 ASD Installation and Operation Manual
Pattern Run Group 3 Selection 1
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 1 selection to be included in the Group 3 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F551
Parameter Type — Selection List
Factory Default — Preset Speed 1
Changeable During Run — No
Pattern Run Group 3 Selection 2
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 2 selection to be included in the Group 3 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F552
Parameter Type — Selection List
Factory Default — Preset Speed 2
Changeable During Run — No
Pattern Run Group 3 Selection 3
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 3 selection to be included in the Group 3 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F553
Parameter Type — Selection List
Factory Default — Preset Speed 3
Changeable During Run — No
Pattern Run Group 3 Selection 4
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 4 selection to be included in the Group 3 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F554
Parameter Type — Selection List
Factory Default — Preset Speed 4
Changeable During Run — No
Pattern Run Group 3 Selection 5
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 5 selection to be included in the Group 3 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F555
Parameter Type — Selection List
Factory Default — Preset Speed 5
Changeable During Run — No
F551 F555