Toshiba HX7+ ASD - Accel #1 Time and Decel #1 Time; Maximum, Upper, and Lower Limit Frequencies

66 HX7+ ASD Installation and Operation Manual
F EEDBACK
P ARAMETERS
PG Settings
Speed Loop Proportional Gain F376
Speed Loop Integral Gain F377
Motor Counter Data Selection F378
Speed Loop Parameter Ratio F379
Drooping Control
Drooping Gain 100% F320
Speed at Drooping Gain 0% F321
Speed at Drooping Gain 100% F322
Drooping Insensitive Torque Band F323
Drooping Output Filter F324
Drooping Reference F327
Load Inertia (Acc/Dec Torque) F325
Load Torque Filter F326
Override Control
Adding Input Selection F660
Multiplying Input Selection F661
CN8 Option (LED Keypad) Override
Multiplication Gain
F729
P ATTERN R UN
Pattern Run
Pattern Run Mode and Restart Configuration F520
Speeds
Pattern #1 Speeds F530
Pattern #2 Speeds F540
Pattern #3 Speeds F550
Pattern #4 Speeds F560
Preset Speeds
#1 Frequency & Characteristics F018
#2 Frequency & Characteristics F019
#3 Frequency & Characteristics F020
#4 Frequency & Characteristics F021
#5 Frequency & Characteristics F022
#6 Frequency & Characteristics F023
#7 Frequency & Characteristics F024
#8 Frequency & Characteristics F287
#9 Frequency & Characteristics F288
#10 Frequency & Characteristics F289
#11 Frequency & Characteristics F290
#12 Frequency & Characteristics F291
#13 Frequency & Characteristics F292
#14 Frequency & Characteristics F293
#15 Frequency & Characteristics F294
Preset Speed Mode
Use Preset Speed F380
C OMMUNICATION
Communication Settings
ASD Number F802
Logic (TTL) Baud Rate F800
RS232/RS485 Baud Rate F820
Program Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number