3.16 Expansion Test 3 Tests and Diagnostics
QOSMIO G20 Maintenance Manual (960-511) CONFIDENTIAL] 3-33
Subtest 02 RGB monitor ID
NOTE: To execute this subtest, monitor supporting EDID (Extended Display
Identification Data) is required.
Connect a wraparound connector to CRT monitor for the test of ID acquisition.
This subtest is executed by using VESA command.
CAUTION: It becomes NG because the priority is given to the internal monitor in a
simultaneous display mode.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
