3.31 SETUP 3 Tests and Diagnostics
QOSMIO G50 Maintenance Manual (960-683) [CONFIDENTIAL] 3-85
(b) HDD Password Mode
This item registers HDD password and can be selected only for registering
HDD password. To change HDD Password Mode when HDD password is
registered, delete the registered HDD password first, and then register new
password.
User Only Sets only User HDD Password (Default)
Master+User Sets Master HDD Password and User HDD Password
(c) User Password
This item sets User password.
For details on setting user password, refer to the User’s Manual.
(d) Master Password
This item sets the Master HDD password.
This can be set Master+User is set in the HDD password Mode. For details,
refer to the User’s Manual.
5. Boot Priority
(a) Boot Priority
Use this option to set the priority for booting of the computer and the priority
for the HDD for booting.
HDD→FDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: HDD, FDD, CD-
ROM and LAN. (Default)
FDD→HDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: FDD, HDD, CD-
ROM (*1) and LAN
HDD→CD-ROM→LAN→FDD: The computer looks for bootable files in
the following order: HDD, CD-ROM,
LAN and FDD.
FDD→CD-ROM→LAN→HDD: The computer looks for bootable files in
the following order: FDD, CD-ROM,
LAN and HDD.
CD-ROM→LAN→HDD→FDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
HDD and FDD.
CD-ROM→LAN→FDD→HDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
FDD and HDD.
(*1) CD-ROM refers to a Optical Disk Drive.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General