4.18 TV tuner 4 Replacement Procedures
QOSMIO G50 Maintenance Manual (960-683) [CONFIDENTIAL] 4-57
Installing the TV tuner
The following describes the procedure for installing the TV tuner (See Figure 4-36).
1. Insert the TV tuner into the connector CN2700 on the system board slantwise.
2. Secure the TV tuner with the following screws while pushing it.
• M2.0×3C BIND screw ×2
3. Connect the TV tuner antenna cable to the connectors on the TV tuner and system
board.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
