4.20 Wireless USB card 4 Replacement Procedures
QOSMIO G50 Maintenance Manual (960-683) [CONFIDENTIAL] 4-61
Installing the Wireless USB card
The following describes the procedure for installing the wireless USB (See Figure 4-38).
1. Insert the wireless USB card into the connector CN2700 on the system board
slantwise.
2. Secure the wireless USB with the following screws while pushing it.
• M2.0×3C BIND screw ×2
3. Connect the wireless USB antenna cable to the connector on the TV tuner.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General