4.22 FM tuner 4 Replacement Procedures
QOSMIO G50 Maintenance Manual (960-683) [CONFIDENTIAL] 4-65
Installing the FM tuner
The following describes the procedure for installing the FM tuner (See Figure 4-40).
1. Connect the FM tuner cable to the connector on the FM tuner.
2. Set the FM tuner to the slot and secure it with the following screws.
• M2.0×4B BIND screw ×2
3. Connect the FM tuner antenna cable to the connector on the FM tuner.
4. Connect the FM tuner cable to the connector CN3011 on the system board.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General