4.32 Modem jack/FM jack/DC-IN jack/right LED 4 Replacement Procedures
QOSMIO G50 Maintenance Manual (960-683) [CONFIDENTIAL] 4-95
Installing the Modem jack/FM jack/DC-IN jack/right LED
The following describes the procedure for installing the modem jack/FM jack/DC-IN
jack/right LED (See Figure 4-62).
1. Set the modem jack/FM jack/DC-IN jack/right LED to the slots of the base
assembly and arrange each cable.
2. Secure the right LED with the following screw.
• M2.0×4B FLAT BIND screw ×1
Downloaded from LpManual.com Manuals
To Next Page
Loading...
