2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures
QOSMIO G50 Maintenance Manual (960-683) [CONFIDENTIAL] 2-11
Check 1 Convert the DC IN icon blink pattern into the hexadecimal error code and compare
it to the tables below. Then go to Check 2.
Table 2-3 Error code
Error code Where error occurs
1*h DC Power (AC Adapter)
2*h Main battery
3:h 2nd battery
4*h S3V output
5*h E5V output
6*h E3V output
7*h 1R5-E1V output
8*h 1R8-B1V output
9*h PPV output
A*h 1R05-P1V output
B*h 1R5-E1V output
C*h PGV / 1R05-P1V output
D*h 1R8-PGV / 1R5-P1Voutput
E*h SPURS-P5V / P5V output
F*h -
 DC power supply (AC adapter)
Error code Meaning
10h AC Adapter output voltage is over 20.92V.
11h Common Dock output voltage is over 20.92V.
12h Current from the DC power supply is over 10.0A.
13h Current from the DC power supply is over 0.5A when there is no load.
14h The compensation value of [0A] is not within the limits from design data .
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General