2 Troubleshooting Procedures
2-60 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
2.15 Bluetooth Troubleshooting
To check if the Bluetooth is malfunctioning or not, follow the troubleshooting procedures
below as instructed.
Procedure 1: Transmitting-Receiving Check
Procedure 2: Antenna Connection Check
Procedure 3: Replacement Check
Procedure 1 Transmitting-Receiving Check
Before starting the test, make sure the wireless communication switch is set in the “ON”
position.
Check 1 Execute the Bluetooth test program as part of the LAN/Modem/ Bluetooth/
IEEE1394 test program to check the transmitting-receiving function of Bluetooth.
You will need a second computer that can communicate by Bluetooth. Perform
the test following the instructions described in Chapter 3 Tests and Diagnostics.
If the computer passes the test, the function is correctly working. If the computer
does not pass the test, perform Procedure 2.
To Next Page
Loading...
