Toshiba Tecra S3 - Cover Latch

4.25 Cover latch
Removing the Cover latch
To remove the cover latch, follow the steps below and refer to Figure 4-48.
1. Remove the cover cap.
2. Remove the cover latch to the direction in the figure below. Be careful not lose the
spring
Cover cap
Cover latch
Spring
Figure 4-48 Removing the cover latch
Installing the Cover latch
To install the cover latch, follow the steps below and refer to Figure 4-48.
1. Install the cover latch in place.
2. Install the cover cap.
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-65