Toshiba Tecra S3 - Bluetooth Test

Tests and Diagnostics
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 3-83
3.29.3 Bluetooth test
To execute this test, input 3 and press Enter.
NOTE: Use another computer that can communicate by the Bluetooth as a reference
machine to perform this test.
Insert a floppy disk containing the test program into the target machine and turn on the target
machine. The following Bluetooth test menu will appear.
#######################################################################
#### Bluetooth sub system test program VX.XX #####
######################################################################
* *
* 1....BD_ADDR check *
* *
* 3....Communications test (DUT mode) *
* *
* T....communications test (TEST mode) *
* *
**********************************************************************
....Press test number [1, 3, T] ?
Press 1 or 3 key to perform the corresponding subtest. To quit the Bluetooth test program,
eject the floppy disk and turn the computer off while the menu above is displayed.