iv [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
The manual is divided into the following parts:
Chapter 1 Hardware Overview describes the TECRA S3 system unit and each
FRU.
Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve
FRU problems.
Chapter 3 Test and Diagnostics describes how to perform test and diagnostic
operations for maintenance service.
Chapter 4 Replacement Procedures describes the removal and replacement of the
FRUs.
Appendices The appendices describe the following:
Handling the LCD module
Board layout
Pin assignments
Keyboard scan/character codes
Key layout
Wiring diagrams
BIOS rewrite procedures
EC/KBC rewrite procedures
Reliability
Maintenance of TOSHIBA RAID
To Next Page
Loading...
