Tests and Diagnostics
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 3-55
Subtest 07 LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions
in the display to execute the test.
[HDD Access LED test]
Press any key and following message appears in the display.
[Caps/Num/Overlay BT/W-LAN LED test]
(1) Press [Caps Lock ] key ! ...Caps (on/off)
(2) Press [Fn + F10 ] key ! ...Arrow (on/off)
(3) Press [Fn + F11 ] key ! ...Num (on/off)
(4) Slide [BT/W-LAN switch L&R]! (on/off)
Confirm corresponding LED lights properly.
Press any key and following message appears in the display.
Check [DC-IN]&[Power]&[Main Battery]LED = Green/Orange
Check if the each LED lights in the same color shown in the display (Message
switches Green ↔ Orange).
Press Enter and return to the ONLY ONE TEST menu.
To Next Page
Loading...
