Toshiba Tecra S3 - Page 207

Tests and Diagnostics
3-88 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
When the test begins, the machine displays BD_ADDR of the DUT. The
progress bar appears when the preparation is completed. The following
message is displayed.
-----------------------------------------------------------------------------
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX Copyright (C) by TOSHIBA Co.
-----------------------------------------------------------------------------
+----------------------+
| DUT | BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
+----------------------+
Ready>>>>>>>>>>>>>>>>>>>>>> <- Progress Bar
[ESC] : Stop
Insert a floppy disk containing the test program into the tester machine and
turn on the power. When the Bluetooth test menu is displayed on the tester
machine, press T and Enter to select the subtest. The following message will
appear:
-----------------------------------------------------------------------------
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX Copyright (C) by TOSHIBA Co.
-----------------------------------------------------------------------------
+------------------+
| |
| Tester |
| |
+------------------+
[ESC]:Finish Tester [SPACE]:Start
Is DUT ready?
Then press Space to start the Bluetooth communication test.