Toshiba Tecra S3 - Page 275

5. Turn the computer face down and remove the following screws.
• M2.5×16B FLAT HEAD screw ×8 (“16” in the figure below)
• M2.5×8B FLAT HEAD screw ×7 (“8” in the figure below)
• M2.5×4B FLAT HEAD screw ×1 (“4” in the figure below)
16
4
8
8
8
8
8
8
8
16
16
16
16
16
16
16
Figure 4-19 Removing the display assembly (2)
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-32