4.30.3 Replacing the 15.0-inch XGA Samsung Fluorescent Lamp
CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD panel. Be careful not to let dust or
other foreign substance into the module.
Disassembling the 15.0-inch XGA Samsung Fluorescent Lamp
To disassemble the 15.0-inch XGA Samsung fluorescent lamp, follow the steps below and
refer to Figure 4-88 to 4-91.
1. Remove the PCB.
CAUTION: Handle with care not to damage the COF of S/D and G/D ICs.
PCB Cover
Figure 4-88 Replacing Samsung fluorescent lamp (XGA) (1)
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-106
To Next Page
Loading...
