Appendices Appendix J Maintenance of TOSHIBA RAID
Table J-1
List of Command (2/2)
LBA (Logical Block Address): First sector address caused an error.
Sector Count: Number of sectors transmitted from the address indicated by LBA.
STATUS: Status of command. The lowest bit becomes “1”, when an error occurs.
Error: Content of error. It indicates that an error occurs when the object bit is “1”.
Bit7:ICRC
Indicates that a CRC error occurs on the transmission bus (SATA) between
Host and HDD.
Bit6:UNC
Indicates that an uncorrectable (media) error occurs.
Bit2:ABRT
Indicate that the command aborts.
J-6 [CONFIDENTIAL]] TECRA S3 Maintenance Manual (960-532)
To Next Page
Loading...
