2 Troubleshooting Procedures
2-36 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
Table 2-6 Printer port LED resume mode error status (4/4)
LED status Test item Contents
(30h)
Waiting for the completion of recovery
of VGA register
Recovery of PIT register
Recovery of PCI configuration register
Recovery of PIC MASK
Executing of driver for RESUME
Waiting for the completion of recovery
of FDD
(For models supporting built-in FDD)
31h Checks if the power-off switch is
pressed or not during resume
processing/
Suspends if pressed.
Executes HOTKEY F1 when booting in
instant security
32h (Not in ACPI mode) Clears key buffer
33h (In ACPI mode) Clears IRT status.
34h (In ACPI mode) Clears flag in Resume process
Acquires Wake Up Vector address.
Clears key buffer.
Renewal of date/time
ACPI mode on
Recovery of write-protected status before.
FFh (In ACPI mode / not in ACPI mode)
Initializing printer port (For models supporting
printer port)
Returning to the main process
To Next Page
Loading...
