EasyManua.ls Logo

Toyota Navigation System RAV4 - Page 142

Toyota Navigation System RAV4
368 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
142
1. VOICE COMMAND SYSTEM OPERATION
RAV4_Navi+MM_OM42A43U_(U)
15.08.10 11:04
1 Press the talk switch.
2 Say “Play song <name>”.
A confirmation screen will be displayed
showing the recognition results. If multiple
matching items are found, a selection
screen will be displayed. Say “<num-
ber>” or select the number.
The system starts playing music and the
song lists are displayed.
INFORMATION
The voice command recognition is
designed to recognize the main body of
the official street name.
For example: if the official street name is
“East Main Street”, the voice command
recognition will recognize “Main”.
Say the desired number, cardinal direc-
tion etc. in the place of the “<>”.
For example: Say “West 555”.
Inputting the house number can be
skipped.
Even if the state set using voice recogni-
tion is different from the set state in the
“Address” screen (which was set when a
destination was set manually), the set
state in the “Address” screen will not
change. (P.285)
The house number voice recognition
conditions are outlined below:
Numerals: 10 digits or less
Numerals and cardinal direction or a
hyphen and numerals: A total of 9
digits or less (Do not say “and”.)
Cardinal direction or a hyphen and
numerals: A total of 9 digits or less
(Do not say “and”.)
Numerals are recognized as single
digits only.
The cardinal direction and hyphens
are only recognized once.
The following cardinal directions can
be recognized: North, East, West and
South.
VOICE COMMAND EXAMPLE:
SEARCH FOR A SONG
INFORMATION
The Gracenote database is only com-
patible with the USB or iPod mode.
A USB memory or iPod must be con-
nected to enable track searching and
playback. (P.103, 108)
When a USB memory or iPod is con-
nected, recognition data is created so
tracks can be searched using voice
commands.
Recognition data is updated under the
following conditions:
When the USB memory or iPod data
has changed.
When the voice recognition language
is changed. (P.56)
While the recognition data is being cre-
ated or being updated, a track search
cannot be performed using a voice com-
mand.

Table of Contents

Related product manuals