Toyota Navigation System RAV4 - How to Switch the Display

189
3. PANORAMIC VIEW MONITOR
RAV4_Navi+MM_OM42A43U_(U)
15.08.21 12:27
PERIPHERAL MONITORING SYSTEM
6
HOW TO SWITCH THE DISPLAY
Vehicles without a smart key system
When you press the camera switch or shift the shift lever to the “R” position while
the engine switch is in “ON” position, the panoramic view monitor operates.
Vehicles with a smart key system
When you press the camera switch or shift the shift lever to the “R” position while
the engine <power> switch is in IGNITION ON <ON> mode, the panoramic view
monitor operates.
The monitor displays various views of the position of the vehicle. (The following is
an example)