244
2. SETUP
RAV4_Navi+MM_OM42A43U_(U)
15.08.10 11:04
■FOR PBAP INCOMPATIBLE BUT
OPP COMPATIBLE Bluetooth
®
PHONES
1 Select “Update Contacts from
Phone”.
2 Transfer the contact data to the system
using a Bluetooth
®
phone.
This operation may be unnecessary
depending on the type of cellular phone.
Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
®
phone.
To cancel this function, select “Cancel”.
3 Check that a confirmation screen is
displayed when the operation is com-
plete.
■UPDATING THE CONTACTS IN A
DIFFERENT WAY (FROM THE “Call
History” SCREEN)
1 Display the phone top screen.
(P.225)
2 Select the “Call History” tab and se-
lect a contact not yet registered in the
contact list.
3 Select “Update Contact”.
4 Select the desired contact.
5 Select a phone type for the phone
number.
This operation cannot be performed
while driving.
For only OPP compatible Bluetooth
®
phones, this function is available when
“Automatic Transfer” is set to off.
(P.242)
To Next Page
Loading...
Need help?
General
