55
2. Bluetooth
®
SETTINGS
RAV4_Navi+MM_OM42A43U_(U)
15.08.10 11:04
BASIC FUNCTION
2
1 Select “Bluetooth* Power”.
When “Bluetooth* Power” is on:
Vehicles without a smart key system
The Bluetooth
®
device is automatically
connected when the engine switch is
turned to the “ACC” or “ON” position.
Vehicles with a smart key system
The Bluetooth
®
device is automatically
connected when the eng
ine <power>
switch is turned to ACCESSORY or IG-
NITION ON <ON> mode.
When “Bluetooth* Power” is off:
The Bluetooth
®
device is disconnected,
and the system will not connect to it next
time.
1 Select “Bluetooth* Name”.
2 Enter a name and select “OK”.
1 Select “Bluetooth* PIN”.
2 Enter a PIN-code and select “OK”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
No. Information Page
Select to set Bluetooth
®
connection on/off.
55
Displays system name.
Can be changed to a de-
sired name.
55
PIN-code used when the
Bluetooth
®
device was reg-
istered. Can be changed to
a desired code.
55
Device address is unique
to the device and cannot be
changed.
Select to set the phone
connection status display
on/off.
Select to set the connec-
tion status display of the
audio player on/off.
Compatibility profile of the
system device.
Select to reset all setup
items.
CHANGING “Bluetooth*
Power”
● While driving, the auto connection state
can be changed from off to on, but can-
not be changed from on to off.
EDITING THE Bluetooth* NAME
EDITING THE PIN-CODE
To Next Page
Loading...
Need help?
General
