TracVision TV3 User’s Guide
80
Troubleshooting
222 The antenna’s internal temperature exceeds acceptable
limits. Turn off the system and allow it to cool.
223 The antenna’s main board has lost gyro calibration data. A
technician should calibrate the antenna’s gyros.
226 The antenna has lost RF communications. Contact KVH.
227 The antenna’s RF software might be corrupted. Contact
KVH.
228 The antenna has lost RF communications. Contact KVH.
229 The antenna’s RF software might be corrupted. Contact
KVH.
231 The antenna’s RF software might be corrupted. Contact
KVH.
232 The antenna’s RF software might be corrupted. Contact
KVH.
241 The antenna’s main board detects a power failure. Contact
KVH.
269 The main antenna processor detects that LNB voltage is
out of range. Contact KVH.
270 The azimuth or elevation gyro needs to be replaced.
Contact KVH.
272 The antenna’s main software does not match the antenna
type. Contact KVH.
273 The antenna’s motor software does not match the antenna
type. Contact KVH.
275 The azimuth or elevation gyro needs to be replaced.
Contact KVH.
276 The antenna’s main board has lost accelerometer
calibration data. A technician should calibrate the
antenna’s accelerometer.
Error Description
To Next Page
Loading...