58 RT-SVP011E-EN
TD7 Display
Immediately following these tables there is an example of placing a component into manual
override which is representative of the process for interacting with any of the components from this
list.
Table 21. Complete list of manual override selections – unit button
Page 1
Supply Fan Manual Override
Auto / Manual
Relief Fan Manual Override
Auto / Manual
Return Fan Manual
Override
Auto / Manual
Outdoor Air Damper Manual
Override
Auto / Manual
Relief Air Damper Manual
Override
Auto / Manual
Energy Consumption Reset
XXXX kWh
Reheat Pumpout Relay Manual
Override
Auto / Manual
Page 2
Alarm Relay Manual Override
Auto / Off / On
VAV Box Relay Manual Override
Auto / Off / On
VOM Relay Manual
Override
Auto / Off / On
Gas Heat Modulating
(a)
(a) Manual Override Control of Heating outputs are setup in Stop mode, and will be turned On only in Auto mode.
Manual
Override
Auto / Manual
Gas Heat Staged Manual
(a)
Override
Auto / Manual
Electric Heat Modulating
(a)
Manual Override
Auto / Manual
Electric Heat Staged
(a)
Manual
Override
Auto / Manual
To Next Page
Loading...
