Trane Rover - Page 21

EMTX-SVX01G-EN 21
Using Rover LonTalk
2. Click the button to start either LonTalk Service Tool or the LonTalk Configuration Only
Service Tool. The Rover application window displays (Figure 13).
During startup, Rover looks for a communications link and if it finds one, it fills the Active Group
tree with any communicating devices on the communications link. If no link is found or no devices
are found on the link, the Active Group tree contains only the Active Group icon with no devices
listed.
Figure 12. Rover startup menu
LonTalk configuration-only tool
LonTalk service tool
Figure 13. Rover startup menu
Menu bar
Active
Group tree
Workspace
Status bar