Trane Rover - Adding Network Variable Bindings

38 EMTX-SVX01G-EN
Configuring a Device
Adding Network Variable Bindings
Rover must be in the active or server-connected mode to create bindings.
To add network variable bindings:
1. Click any icon in the Active Group tree.
2. From the Group menu, choose Bindings to display the Network Variable Bindings Summary
dialog box (Figure 27).
The Bindings command is available only if an icon in the Active Group tree is selected.
3. Click Add... to display the Add Network Variable Bindings dialog box (Figure 28, p. 39).
Figure 27. Network Variable Bindings Summary