EMTX-SVX01G-EN 15
Connecting Rover to a Device
Verifying Network Communications
You can verify the proper operation of the USB adapter after connecting Rover to a LonTalk device.
The following sections instruct how to verify network communications and diagnostics using
either a USB 2.0 adapter or PCMCIA card.
Verifying Using a USB Adapter
Note: The dialog box title will change depending on the LonWorks
™
interface being tested.
To verify communications:
1. Double-click the My Computer icon on the Windows desktop to display the My Computer
window.
2. Double-click the Control Panel icon to display the Control Panel window.
3. Double-click the Lonworks Interfaces icon to display the LonWorks Interfaces dialog box
(Figure 6, p. 16). Then, click the USB tab, select the required interface, and click Te s t .
Figure 5. Connecting Rover to a device using a quick-connect adapter
To Next Page
Loading...