20 EMTX-SVX01G-EN
Using Rover LonTalk
Terminal Block Connection
Ta b l e 3 and Figure 11 below show connection to the terminal block on the Comm4 adapter.
Using Rover LonTalk
This chapter shows how to start Rover LonTalk, describes the screen layout and conventions, and
how to access the Online Help system.
Starting Rover LonTalk
Once you have Rover installed and connected, you are ready to start the application.
To s t a rt Ro v e r :
1. Double-click the Rover icon on your Windows desktop to display the Rover Service Tool startup
menu (Figure 12, p. 21).
Table 3. Pin definitions on the terminal block
Pin # Comm4 Device
1 Data-(A)
2 Data+(B)
5+5V
6 GND
Figure 11. Comm4 terminal block connections
To Next Page
Loading...