8 Threat Protection System Hardware Specification and Installation Guide
TPS TX Series product overview
This information describes the components, chassis, requirements, and installation specifics of the TPS
8200TX and 8400TX devices. The following topics are discussed:
• Device overview on page 8
• Model requirements on page 25
• I/O module installation on page 13
• Technical specifications on page 26
For information about installing the device, see Install your TPS device on page 34. Prior to installation,
have the TPS CLI Reference available for configuration information.
Device overview
The 8200TX and 8400TX devices are high-range systems that are designed for network environments
requiring up to 40 Gbps of inspection throughput with up to 2 Gbps available for Secure Socket Layer (SSL)
inspection.
Chassis – front panel
The TPS TX Series devices include a 1U (8200TX) and a 2U (8400TX) form-factor device that are rack-
mountable in a 19-inch rack (or 23-inch rack, with appropriate conversion parts available from rack
accessory vendors). These appliances support throughput across multiple copper and fiber ports.
The 8200TX and 8400TX security devices provide up to 40 Gbps of inspection throughput.
The following illustration shows a front panel view of the TX Series devices:
To Next Page
