Trend Micro TippingPoint Series - Initial Configuration and Licensing

32 Threat Protection System Hardware Specification and Installation Guide
Model requirements
The following topics describe the power and cabling requirements for the TPS 440T device.
• Power requirements on page 32
• Cabling requirements on page 32
Power requirements
The TPS 440T device requires Alternating Current (AC) that meets the following requirements:
• AC: Voltage 100V to 240V; 4 to 2A; 47 to 63 Hz
The TPS 440T device ships with one AC power supply.
Cabling requirements
The TPS 440T device ships with the following cables:
• One AC power cable
• Null modem cable (USB to RJ-45) for the serial console management port shown in Figure 12 on page
31
Technical specifications
The TPS 440T device has the following specifications.
Table 13. TPS 440T – technical specifications
Specification Description
Dimensions
(unpackaged)
1U form factor – 1.73 in (H) x 16.78 in (W) x 17.72 in (D) (4.40 cm x 42.62 cm x
45.00 cm)
Weight 15.28 lbs (6.93 kg)
Power Requirements AC: Voltage 100 to 240; Current 4 to 2A; Frequency 50to 60 Hz
The device’s maximum power consumption is 250W.