20 Threat Protection System Hardware Specification and Installation Guide
TPS 2200T product overview
This information describes the components, chassis, requirements, and installation specifics of the
TippingPoint 2200T device. The following topics are discussed:
• Device overview on page 20
• Model requirements on page 25
• Pluggable transceivers on page 25
• Technical specifications on page 26
For information about installing the device, see Install your TPS device on page 34. Prior to installation,
have the TPS CLI Reference available for configuration information.
Device overview
The TPS 2200T device is a mid-range system that has a larger form factor than the TPS 440T device and is
designed for network environments requiring up to 2 Gbps of inspection throughput with up to 500 Mbps
available for Secure Socket Layer (SSL) inspection. This model provides the same high-level of security
protection as the higher-capacity models.
Chassis – front panel
The TPS 2200T device is a 2U form-factor device that is rack-mountable in a 19-inch rack (or 23-inch rack,
with appropriate conversion parts available from rack accessory vendors). This device supports throughput
across multiple copper and fiber ports.
The following illustration shows a front panel view of the TPS 2200T device:
To Next Page
Loading...
