52 Threat Protection System Hardware Specification and Installation Guide
Command Description
user-disk encryption
disable
Disables encryption of the external user disk if the system master
key has been set. Changing the encryption status reformats the
card and erases all data on the drive.
Note: Master key and encryption controls can also be configured
using System > Settings > Data Security in the LSM.
For more information, refer to the Local Security Manager
User Guide.
show user-disk Shows properties of the external user disk, including operation
status and capacity.
master-key set Encrypts the external user disk and the system keystore by using
the system master key. You are prompted to enter a master
key that is between 9 and 32 characters in length, contains a
combination of numbers and uppercase and lowercase letters, and
that has at least one special character (for example, !@#).
Note: Master key and encryption controls can also be configured
using System > Settings > Data Security in the LSM.
For more information, refer to the Local Security Manager
User Guide.
To Previous Page
Loading...
