TEW-740APBO2K Setup and Installation
When purchasing the access point bridge kit, mode TEW-740ABPO2K, by default, the
TEW-740APBO access points are preconfigured to establish a point-to-point WDS bridge
between each other using a unique predefined AES encryption key. For convenience, a
unique predefined admin password has already been assigned to both access points.
You can find the preconfigured access point settings on the wireless sticker or on the
device label beneath the cover where the Ethernet ports and LEDs are located. No
additional configuration is required. Ma
On the device label located inside, you can also find the preconfigured default settings
of each access point.
The TEW-740APBO access points will be preconfigured with the following settings:
To Next Page
Loading...
Need help?
General
