DNS2 IP: Enter the IP address of the secondary DNS server to distribute to DHCP
client devices.
WINS IP: Enter the IP address of the WINS (Windows Internet Name Service) server
to distribute to DHCP client devices. Typically this is used on a Windows network to
allow the resolution of computer and device names.
Domain: Enter the domain name to distribute to DHCP client devices. (ex.
trendnet.com)
Lease Time: Enter the time in seconds how long DHCP client devices will retain their
settings assigned by the DHCP service before expiration. Upon expiration, DHCP
client devices will initiate new requests for DHCP client settings.
After the DHCP server settings have been configured and changes have been applied,
dynamic DHCP client leases will appear in the DHCP Client List table.
DHCP Reservation/Static Lease
System > DHCP Setup
Comment: Add a comment or name to help easily identify the device or purpose of
the DHCP static IP lease/reservation.
IP Address: Enter the IP address from the DHCP server IP address range/pool to
permanently assign. (ex. 192.168.10.20)
MAC Address: Enter the MAC address of the client device to assign the permanent
lease in the example format provided and click Add to add the static IP lease to the
list. (ex. 00:11:22:AA:BB:CC). Repeat to add additional static IP leases.
To Next Page
Loading...
Need help?
General
