TRENDnet TEW-750DAP User Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-750DAP
20
Allow/deny multicast streaming
Access > Advanced Network
In some cases, applications require multicast communication (also called IP multicast
which is the delivery of information to a specific group of computers or devices in a
single transmission) typically used in media streaming applications.
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Access, and click on Advanced Network.
3. Under Enable IPv4 Multicast Streams next to Wireless Enhanced Mode, check the
option to enable or uncheck to disable.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don’t Save Settings.

TRENDnet TEW-750DAP Specifications

Operating Environment

operating temperature	0 - 40 °C
operating humidity	Max. 95% non-condensing

Power

input voltage	100 - 240 V AC
output voltage	12 V DC
power consumption	10.1 Watts

Antenna and Wireless

antenna gain 2.4 GHz	2 x 1.5 dBi
antenna gain 5 GHz	2 x 4 dBi
wireless output power 802.11a	15 dBm

Weight and Dimensions

weight	238 g
dimensions	45 x 118 x 164 mm