TRENDnet TEW-750DAP User Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-750DAP
40
IPv6 Connection Settings
Main > IPv6
IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the
number of available Internet public IP addresses due to the 128-bit IP address structure
versus IPv4 32-bit address structure. In addition, there are several integrated
enhancements compared to the most commonly used and well known IPv4 (Internet
Protocol Version 4) such as:
• Integrated IPsec – Better Security
• Integrated Quality of Service (QoS) – Lower latency for real-time applications
• Higher Efficiency of Routing – Less transmission overhead and smaller routing
tables
• Easier configuration of addressing
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Main, and click on IPv6.
3. Select the IPv6 connection type used to assigned IPv6 addressing to the access point.
• Static IPv6
• Auto-configuration (SLAAC/DHCPv6)
• Link-Local Only
Change your access point IP address
Main > Network Settings
Typically, the access point IP address settings only needs to be changed when
connecting the access point to your network and configuring to the device to be in the
same IP network as your existing network.
Default Access Point IP Address Settings: 192.168.10.100 / 255.255.255.0
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Main, and click on Network Settings.
3. Under Connection Type, click the drop-down list to select the access point IP address
settings.
• Dynamic IP (DHCP): Choose the option to set the access point to automatically
obtain IP address settings from a DHCP server
Note: Typically, your network router has a built-in DHCP server.
• Static IP: Choose this option to manually configure the IP address settings of the
access point.
o IP Address: Enter the new access point IP address. (e.g.
192.168.0.100)
o Subnet Mask: Enter the new access point subnet mask. (e.g.
255.255.255.0)
o Gateway Address: Enter the default gateway address of your network.
This parameter is required for the access point to access Internet for
functions such as e-mail notifications.
Note: Typically, your network router IP address is used as the default
gateway address to access the Internet e.g. 192.168.10.1)
o Primary/Secondary DNS Server: Enter the primary and secondary DNS
server addresses. This parameter is required for access point to
resolve web addresses/domain names to IP address for functions such
as e-mail notifications.
Note: Typically, your network IP address is used as the DNS server
address.

TRENDnet TEW-750DAP Specifications

Operating Environment

operating temperature	0 - 40 °C
operating humidity	Max. 95% non-condensing

Power

input voltage	100 - 240 V AC
output voltage	12 V DC
power consumption	10.1 Watts

Antenna and Wireless

antenna gain 2.4 GHz	2 x 1.5 dBi
antenna gain 5 GHz	2 x 4 dBi
wireless output power 802.11a	15 dBm

Weight and Dimensions

weight	238 g
dimensions	45 x 118 x 164 mm