TRENDnet TEW-750DAP User Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-750DAP
45
Create schedules
Tools > Schedules
For additional security control, your access point allows you to create schedules to
specify a time period when a feature on your access point should be activated and
deactivated. Before you use the scheduling feature on your access point, ensure that
your system time is configured correctly.
Note: You can apply a predefined schedule to the following features:
• Wireless (2.4GHz and 5GHz)
• Wireless Multiple SSID (2.4GHz and 5GHz)
• MAC Filters
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Tools and click on Schedules.
3. Review the Schedule settings. Click Save Settings to save settings.
• Name: Enter a name for the schedule you would like to apply.
• Day(s)/Select Day(s): Check Select Day(s) to select the days in the Select Day(s)
section or select All Week to set the schedule for all days.
• All Day – 24 Hours – Check the option to set the schedule to 24 hours or define
the schedule under Start Time and End Time.
• Start/End Time: Select the start and end time you would like the schedule to
follow.
Note: The schedule defined will define the time/day the feature will be activated.

TRENDnet TEW-750DAP Specifications

Operating Environment

operating temperature	0 - 40 °C
operating humidity	Max. 95% non-condensing

Power

input voltage	100 - 240 V AC
output voltage	12 V DC
power consumption	10.1 Watts

Antenna and Wireless

antenna gain 2.4 GHz	2 x 1.5 dBi
antenna gain 5 GHz	2 x 4 dBi
wireless output power 802.11a	15 dBm

Weight and Dimensions

weight	238 g
dimensions	45 x 118 x 164 mm