TRENDnet TEW-750DAP User Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-750DAP
53
View your access point log
Status > Log
Your access point log can be used to obtain activity information on the functionality of
your access point or for troubleshooting purposes.
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Status, and click on Log.
• Time – Displays the time of the log entry. If the time is inaccurate, make sure to
set the access point date and time correctly. (See “
Set your access point date
and time” on page 44)
• Message – Displays the log message.
Access Point Log Navigation
• First Page – Displays the first page of the log.
• Last Page – Displays the last page of the log.
• Previous – Display the log page previous to the current.
• Next – Displays the log page next to the current.
• Clear - Clears all logging
Configure your access point log
Status > Log
You may want to only see specific categories of logging for troubleshooting purposes.
Set the types or categories to include in logging
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Status and click on Log.
3. Next to Log Level, select the category to view in logging.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don’t Save Settings.

TRENDnet TEW-750DAP Specifications

Operating Environment

operating temperature	0 - 40 °C
operating humidity	Max. 95% non-condensing

Power

input voltage	100 - 240 V AC
output voltage	12 V DC
power consumption	10.1 Watts

Antenna and Wireless

antenna gain 2.4 GHz	2 x 1.5 dBi
antenna gain 5 GHz	2 x 4 dBi
wireless output power 802.11a	15 dBm

Weight and Dimensions

weight	238 g
dimensions	45 x 118 x 164 mm