© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-750DAP
43
Click Add/Update - Saves the reservation.
Note: Click Clear discards and erases the current information.
You will see the new reservation added to the DHCP Reservation List.
You can check the Enable option to enable the reservation or uncheck to disable.
You can click the
icon to edit the reservation or to delete the reservation.
To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don’t Save Settings.
Allow/deny multicast streaming
Access > Advanced Network
In some cases, applications require multicast communication (also called IP multicast
which is the delivery of information to a specific group of computers or devices in a
single transmission) typically used in media streaming applications.
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Access, and click on Advanced Network.
3. Next to Enable IPv4 Multicast Streams, check the option to enable or uncheck to
disable.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don’t Save Settings.