© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-750DAP
33
Set the device to wireless range extender (repeater) mode
Main > Device Mode
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Main, click on Device Mode.
3. Click the Device Operation Mode drop-down list and select AP Repeater.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don’t Save Settings.
Using wireless range extender (repeater) mode
Wireless > Site Survey
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Wireless and click on Site Survey.
3. Search for your wireless network to extend or repeat in the wireless network list. In
the Select column, click the radio button to select your wireless network.
4. At the bottom, click Connect to connect and copy the settings of the selected wireless
network.
Note: If you are unable to find your wireless network in the list, you can click Refresh to
rescan the available wireless networks.