TRENDnet TEW-750DAP User Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-750DAP
55
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don’t Save Settings.
Send access point logs to an external log server
Tools > Syslog
1. Log into your access point management page (see “
Access your access point
management page” on page 11).
2. Click on Tools and click on Syslog.
3. Next to Enable Logging to Syslog Server, check the option to enable Syslog. Enter the
IP address of the local syslog server to forward the logs.
Note: You can also click the Computer Name drop-down list and select from the DHCP
server list. Click << to copy the IP address information to the Syslog Server IP Address
field. This feature can only be used if using the access point’s built-in DHCP server.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don’t Save Settings.

TRENDnet TEW-750DAP Specifications

Operating Environment

operating temperature	0 - 40 °C
operating humidity	Max. 95% non-condensing

Power

input voltage	100 - 240 V AC
output voltage	12 V DC
power consumption	10.1 Watts

Antenna and Wireless

antenna gain 2.4 GHz	2 x 1.5 dBi
antenna gain 5 GHz	2 x 4 dBi
wireless output power 802.11a	15 dBm

Weight and Dimensions

weight	238 g
dimensions	45 x 118 x 164 mm