Note: If you change the administrator password, you will need to access the router
management page using the User Name “admin” and the new password instead of the
pre-configured default password. If you reset the device to factory defaults, you will
need to access the router management page using the pre-configured settings on the
included wireless sticker in the router package contents or on device label located on the
bottom of the router.
Set your router date and time
System > Time/Date
It is recommended to set the router date and time for scheduling functions and logging
functions for monitoring and troubleshooting.
1. Log into your router management page (see “Access your router management page”
on page 6).
2. Click on System and click on Time/Date.
3. Review the settings below. Click Apply to save and commit the changes.
System Properties
• Local Time – Displays the current day, date, and time. Clicking the SYNC WITH
BROWSER button will automatically copy the current day, date, and time
settings from the web browser and allows the time to be set manually.
• Hostname – Modifies the router host name. The host name identifies is the
name used to identify the router to other computer or devices on the network.
Modifying this setting will modify the hostname used when accessing the
router management page using the hostname or when using the Samba USB
share feature.
• Timezone – Click the drop-down list to select the appropriate time zone.
Time Synchronization
• Clock Mode – Select the method of clock mode
o Local Time: Manually input the time
o NTP: Time is grabbed by a designated NTP server
▪ NTP server candidates – Enter the domain name of the
network time server to obtain time and settings. (e.g.
pool.ntp.org)
o Cloud Sync Time: The time will be synched with TRENDnet Hive cloud
server (optional license is required)
Note: You can add multiple time servers by clicking . If one server
is not available, your router will try the next available server in the list.
To Next Page
Loading...
