Based on the example, the network settings will be the following:
17. Under Authentication Key, enter the Pre-Shared Key (PSK) for the IPsec VPN tunnel
and click Apply. (e.g. 1234567890)
Secure Socket Layer VPN (SSL) / OpenVPN
Network > VPN > OpenVPN
SSL VPN Server Setup
1. Log into your router management page (see “Access your router management page”
on page 6).
2. Click on Management and click Certificate Management.
3. Enter a name for the certificate to use for SSL VPN and click Add. (e.g. SSL-VPN)
4. Click the Used for drop-down list and select OpenVPN.
5. In the Country Code field, enter the two letter country code. (e.g. US)
6. In the State or Province Name field, enter the full name of the state or province. (e.g.
California)
To Next Page
Loading...
