64 Juno Series Handhelds User Guide
1. Pair the Juno series handheld with a cellular phone that supports the Bluetooth
PAN profile.
2. Enable the PAN connection on the handheld.
Step 1: Pairing with the cellular phone
1. Make sure that the handheld and the Bluetooth device you want to pair with are
within five meters of each other, and that the Bluetooth radio in each device is
turned on.
2. On the Juno series handheld, tap / Se
ttings / Bluetooth.
3. In the De
vices tab, tap Add new device. The handheld searches for other
Bluetooth devices and displays them in the list.
If the device you are trying to connect is not displayed in the list, ensure that the
device
is on and within range and then tap Refresh to search for devices again.
4. Tap the name of the device you want to pair with and then tap
Next on the right
softkey.
5. In the Pa
sscode field, enter a passcode of your choice (between 1 and 16
characters).
Note – T
rimble recommends that you enter only numbers, as some devices do not support
passcodes that include letters.
6. Tap
Next on the right softkey.
7. When prompted, enter the same passcode on the other device.
On the handheld, the P
artnership Settings screen appears.
8. If required, change the name of the device in the Di
splay Name field.
9. Select the N
etwork Access Point check box. The boxes for other services offered
by the phone can be unchecked.
10. Tap
Finish on the right softkey.
Step 2: Enabling the PAN connection
1. In the PAN tab of the Bluetooth application on the handheld, select the cellular
phone you just connected to from the drop-down list and then select the Enable
PAN connection check box.
The status field in the PAN tab shows the progress of the connection. Wait until
t
he Status field shows Connected.
2. Check the cellular phone and if prompted, allow the connection.
The or icon in the title bar changes to .
3. Tap
OK to close the Bluetooth application.
4. Tap to close the S
ettings screen.
To Next Page
Loading...