Juno Series Handhelds User Guide 13
Accessories
The following optional accessories are available:
For more information, go to:
• www.trimble.com/mappingGIS/juno3B.aspx
• www.trimble.com/mappingGIS/juno3D.aspx
Use and care of the handheld
When using the handheld:
• Protect the touch screen by using your finger or the stylus provided, and avoid
using excessive pressure and sharp or abrasive objects. To protect the touch
screen from pressure and abrasive objects, Trimble recommends that you apply
a screen protector.
• Keep the outer surface free of dirt and dust.
• Ensure that protective covers are appropriately fitted to the external antenna
port, USB and power connectors, so that they are kept free from dirt, dust, fluid
ingress, and electrostatic discharge.
• Protect the handheld from extreme temperatures. For example, do not leave the
handheld on the dashboard of a vehicle.
• The handheld is rated IP54, but is not waterproof. Do not immerse the handheld
in water, and be careful not to drop the handheld or subject it to any strong
impact.
To clean the handheld, wipe it with a clean dry cloth.
Storage
If you are not going to use the handheld for three months or more, Trimble
recommends that you do not leave the handheld in Suspend mode (see pag
e 21).
Instead, partially charge the battery and then turn off the handheld.
• Vehicle power adaptor
• Carry case with belt clip
• External patch antenna
• Screen protectors (2 pack)
anti-glare or ultra-clear
• Vehicle mount
• Pole mount
• Replacement stylus (2 pack)
• Replacement International AC
adaptor
• Replacement battery
• External battery charger
• Replacement wrist strap
To Next Page
Loading...
Need help?
General
