26 Juno Series Handhelds User Guide
Installing and removing the SIM card
C
CAUTION – The SIM card and its contents can be easily damaged by scratches or bending.
Use caution when inserting or removing the card.
C
CAUTION – The presence of any dust or moisture in the SIM card slot may adversely affect
the device and void your Trimble warranty. To prevent dust or moisture entering the SIM
card slot:
– When inserting or removing a
SIM card, place the handheld on a dust-free indoor
surface.
C
CAUTION – Static electricity can harm electronic components inside the handheld. To
prevent static damage, discharge static electricity from your body before you touch any of
the electronic components inside your device, such as a memory module. You can do so by
touching an unpainted metal surface.
To insert or remove a SIM card:
1. Turn off the handheld. See Turning on
and turning off the handheld, page 20.
2. Place the handheld
face down on a
dust-free indoor surface.
3. Remove the battery cover door, and
t
hen remove the battery. See Inserting
and removing the battery, page 18.
4. Insert or remove the SIM card as shown,
wi
th the gold contacts face down.
5. Replace the battery and the battery cover door.
To Next Page
Loading...
Need help?
General
