Trimble R7 User Manual

Trimble R7/R8 GPS Receiver User Guide 195
Troubleshooting C
Trimble R7 and R8
Table C.2 describes some possible receiver issues, possible causes,
and how to solve them
.
Table C.2 Receiver issues
Issue Possible cause Solution
The receiver does not
power up.
External power too low. Check the charge on the external
battery, and check the fuse if
applicable. Replace the battery if
necessary.
Internal power too low. Check the charge on the internal
batteries and replace if necessary.
Ensure battery contacts are clean.
External power not properly
connected.
Check that the Lemo connection is
seated properly.
Check for broken or bent pins in the
connector.
Faulty power cable. Try a different cable.
Check pinouts with multimeter to
ensure internal wiring is intact.

Trimble R7 Specifications

General

Brand	Trimble
Model	R7
Category	GPS
Language	English